ブランド | 白光(HAKKO) |
---|---|
製品型番 | FX600-02 |
製品サイズ | 23.3 x 3.5 x 3.5 cm; 61 g |
色 | ブルー |
表札の名字 | 通常モデル |
壁紙の柄・パターン | 単品 |
電源 | 電源コード式 |
ワット数 | 50 W |
入数 | 1 |
レーザークラス | ポータブル |
付属品 | なし |
電池付属 | いいえ |
商品の重量 | 61 g |
プライム無料体験をお試しいただけます
プライム無料体験で、この注文から無料配送特典をご利用いただけます。
非会員 | プライム会員 | |
---|---|---|
通常配送 | ¥410 - ¥450* | 無料 |
お急ぎ便 | ¥510 - ¥550 | |
お届け日時指定便 | ¥510 - ¥650 |
*Amazon.co.jp発送商品の注文額 ¥3,500以上は非会員も無料
無料体験はいつでもキャンセルできます。30日のプライム無料体験をぜひお試しください。
アクセサリを追加:
白光(HAKKO) ダイヤル式温度制御はんだこて FX600-02
詳細はこちら
購入オプションとあわせ買い
ブランド | 白光(HAKKO) |
商品用途・使用方法 | 住宅用, ジュエリーのはんだ付け, 産業用 |
電源 | 電源コード式 |
ワット数 | 50 W |
特徴 | ポータブル |
この商品について
- 電源:AC 100V 50/60Hz
- 消費電力:50W
- 設定温度範囲:200~500℃
- 付属こて先:B型(品番 T18-B)
- プラグ形状:平型プラグ
- 全長:233mm(こて先B型を付けた場合)
- 重量:61g(こて先B型を付けた場合)
適合性の情報の正確さには万全を期しておりますが、誤って表示される可能性もあります。商品内容及び適合性の有無などについて商品詳細ページをよくご確認ください。また、商品のご使用前にメーカーの定める使用上の注意事項・使用方法をお読みいただき、記載事項にしたがって正しくご使用ください。
Amazon 新生活SALE (Final) を今すぐチェック
よく一緒に購入されている商品

この商品をチェックした人はこんな商品もチェックしています
類似商品と比較する
この商品 白光(HAKKO) ダイヤル式温度制御はんだこて FX600-02 | おすすめ | dummy | dummy | dummy | |
もう一度お試しください 追加されました | もう一度お試しください 追加されました | もう一度お試しください 追加されました | もう一度お試しください 追加されました | もう一度お試しください 追加されました | |
価格 | -36% ¥4,073¥4,073 参考: ¥6,358 | -17% ¥727¥727 参考: ¥880 | -33% ¥5,806¥5,806 参考: ¥8,712 | -26% ¥5,380¥5,380 参考: ¥7,260 | ¥1,799¥1,799 |
配達 | 最短で3月31日 日曜日のお届け予定です | — | — | 最短で4月5日 金曜日のお届け予定です | 最短で3月31日 日曜日のお届け予定です |
お客様の評価 | |||||
加熱性能 | 4.7 | 4.2 | 4.9 | 4.7 | 4.2 |
温度調整 | 4.6 | 4.5 | 4.9 | 4.7 | 3.9 |
耐熱性能 | 4.5 | 4.7 | 4.7 | 4.6 | 4.0 |
使いやすさ | 4.7 | — | 4.6 | — | 4.0 |
初心者用 | 3.8 | — | 4.7 | — | 4.1 |
販売元: | Amazon.co.jp | Amazon.co.jp | Amazon.co.jp | Amazon.co.jp | Tuloka JP |
電源 | 電源コード式 | アダプター | 電源コード式 | 100 V | 110 V |
発熱体タイプ | セラミック | — | セラミック | セラミック | セラミック |
ヘッドスタイル | コニカル | — | ベベル | ベベル | ペンシル, ベベル |
スタイル | 通常モデル | 専用キャップ | 本体(PX-280) | ペンシル | ペンシル |
上限温度率 | 500 degrees celsius | — | 500 degrees celsius | 540 degrees celsius | 450 degrees celsius |
端末の型番 | FX600-02 | B5286 | PX-280 | FX601-01 | — |
メーカーによる説明

白光(HAKKO) ダイヤル式温度制御はんだこて FX600
・200~500℃まで調整可能
・交換こて先30種類以上
・IC/LED・プリント基板などのはんだ付けに適したはんだこて
特徴
|
|
|
---|---|---|
優れた熱伝導率こて先の外観・デザイン、内部構造を見直すことで熱伝導率を高めたT18シリーズ。 このこて先を採用することで、消費電力(W数)をあげることなく強力な熱復帰率を実現。 |
LEDで温度をお知らせLEDで設定温度に達したことをお知らせ。 |
CALツマミで温度補正が可能ダイヤル式の簡単温度設定:グリップに温度コントローラ内蔵。ダイヤルを回すだけで、温度設定ができる。 ※目もり以外でも温度制御は正確に行われる。 |
ダイヤルを外して設定温度をロック
|
|
|
---|---|---|
ダイヤルの外し方中央にあるねじを外して、ダイヤルを取り外せば設定温度がロック可能。 ※ダイヤルのねじ頭を破損する場合があるので、ねじを取り外し・取り付けする場合は、「No.00」のドライバーを使用している。 |
ダイヤルを外した状態取り外し後は専用のロックキーを使って変更する。 |
ロックキーでの設定変更※専用のロックキーを使用しなければ容易に温度設定が変更できない構造になっている。 |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|
白光(HAKKO) ダイヤル式温度制御はんだこて FX600 ブルー | 白光(HAKKO) ダイヤル式温度制御はんだこて FX600 (二極接地プラグ) | 白光 FX601-01 ダイヤル式温度制御ステンドグラス用はんだこて(コテ先6.5C付き) | 白光(HAKKO) 高熱容量ダイヤル式温度制御はんだこて FX601(二極接地プラグ) | |
カスタマーレビュー |
5つ星のうち4.6
2,269
|
5つ星のうち4.4
35
|
5つ星のうち4.5
465
|
5つ星のうち3.8
10
|
価格 | ¥4,073¥4,073 | ¥5,519¥5,519 | ¥5,380¥5,380 | ¥6,541¥6,541 |
品番 | FX600-02 | FX600-01 | FX601-01 | FX601-03 |
設定温度範囲 | 200~500℃ | 200~500℃ | 240~540℃ | 240~540℃ |
プラグ形状 | 平型プラグ | 2極接地型プラグ | 平型プラグ | 2極接地型プラグ |
商品の情報
詳細情報
登録情報
ASIN | B006MQD7M4 |
---|---|
おすすめ度 |
5つ星のうち4.6 |
Amazon 売れ筋ランキング | - 724位DIY・工具・ガーデン (DIY・工具・ガーデンの売れ筋ランキングを見る) - 3位ハンダゴテ |
Amazon.co.jp での取り扱い開始日 | 2011/12/19 |
ご意見ご要望
特定の情報をお探しですか?
商品の説明
商品紹介
IC/LED・プリント基板などのはんだ付けに最適。
グリップに温度コントローラを内蔵してあるので、ダイヤルを回すだけで、簡単に温度設定ができる。
LEDで設定温度に達したことを知らせる。
CALボリュームで温度補正が可能。
消費電力(W数)をあげることなく強力な熱復帰率を実現。
交換こて先は30種類以上。
Amazonより
●温度調整がダイヤルを回すだけでできる
●LEDランプで温度状態が分かる。(上昇中は点灯、設定温度到達で点滅、温度降下中は消灯)
ご注意(免責)>必ずお読みください
メール便で発送いたします。
重要なお知らせ
ご注意(免責)> 必ずお読み下さい
メール便で発送いたします。
イメージ付きのレビュー

-
トップレビュー
上位レビュー、対象国: 日本
レビューのフィルタリング中に問題が発生しました。後でもう一度試してください。
この値段なら手が届くのでお勧めです。市中価格は¥6000代みたいなので、これは格安と思います。
今回の商品購入で60Wのみを残して、あとは処分しました。
小手先を変えることで、大きな面積のもの、極小の電子部品などのはんだ付けが容易にできるようになり、とても便利になりました。何よりも温度調節ができるので、ハンダゴテを当てる時間が大幅に短縮されました。
調整ダイヤルが少し回しにくい気もしますが、慣れれば大丈夫です。
付属のコテ先でいくら温度を高めに設定しても熱を吸われてしまうし
細いコテ先でははんだの乗りが良くないので
このコテはどちらかというとチップ部品系の精密作業用にして
むしろ温度が高めので瞬発力が必要となるパーツ類は
普通の30Wクラスでコテ先が太い物とで使い分けたほうがいいと思う。
大変満足しています。折りたたみコテ台
(FH305-81)も同時に購入して、大変使いやすいです。白光こて先クリーナー クリーニングワイヤータイプ 599B-01をセットして使っています。
他の国からのトップレビュー

To begin this Hakko iron is extremely durable. It is very well built. It's very rigid and you can tell from the hardware and fittings that it's meant for steady work and can take heavy use if needed. Also, don't let the nominal 50W power rating fool you. That is the wattage you get if you use the Japanese 100v electrical system. Here in North America where we use 120v this iron runs at 74W. Check the excerpt from the manual I've attached to the review. 74 watts is plenty of power for large jobs like soldering heavy wires and large speaker tabs. And, unlike the many clones and no-name irons and ironing stations out there, when Hakko says 74 W I believe them! Just because a $15 no-name iron says it's 60W doesn't mean it's true! With this iron, however, you can bank on being 74W at 120v. Another advantage is that it has a 2-prong plug, instead of the grounded 3-prong plug that is on the North American market version. While this does mean you have to manually ground it if you want it to be 100% ESD safe, it also means the power cable is much lighter and more flexible than the one on the grounded version. This means it is more comfortable to use, and the cable won't pull the iron out of the holder just by its weight.
Grounding is easy, by the way; just before you take the tip to the work, touch it against whatever you are using as a ground bus...like the place you connect your grounding wrist strap and/or your grounding desk mat to. Don't have either of those? Then don't worry about whether the iron is grounded, because you have far more risk from ESD from yourself or the work surface than the iron!
Despite being durable and powerful, and having an easy temperature control feature, the iron is also light and really compact, so I can easily have all my soldering stuff in one small toolbox. It is also comfortable in the hand. I don't know why some reviewers have said it's hard to hold, I didn't find this at all. I love using it. I highly recommend this iron if you want to treat yourself to all the best features and reduce your desk clutter. Just make sure you buy GENUINE Hakko tips. This iron will of course take any of the millions of clone T18 tips out there, but the Hakko tips have so many advantages. Why buy a performance vehicle only to put crappy tires on it? The tip is where the rubber meets the road, so to speak, so do yourself a favour and ditch your cheap soldering iron tips!


2024年3月8日にカナダでレビュー済み
To begin this Hakko iron is extremely durable. It is very well built. It's very rigid and you can tell from the hardware and fittings that it's meant for steady work and can take heavy use if needed. Also, don't let the nominal 50W power rating fool you. That is the wattage you get if you use the Japanese 100v electrical system. Here in North America where we use 120v this iron runs at 74W. Check the excerpt from the manual I've attached to the review. 74 watts is plenty of power for large jobs like soldering heavy wires and large speaker tabs. And, unlike the many clones and no-name irons and ironing stations out there, when Hakko says 74 W I believe them! Just because a $15 no-name iron says it's 60W doesn't mean it's true! With this iron, however, you can bank on being 74W at 120v. Another advantage is that it has a 2-prong plug, instead of the grounded 3-prong plug that is on the North American market version. While this does mean you have to manually ground it if you want it to be 100% ESD safe, it also means the power cable is much lighter and more flexible than the one on the grounded version. This means it is more comfortable to use, and the cable won't pull the iron out of the holder just by its weight.
Grounding is easy, by the way; just before you take the tip to the work, touch it against whatever you are using as a ground bus...like the place you connect your grounding wrist strap and/or your grounding desk mat to. Don't have either of those? Then don't worry about whether the iron is grounded, because you have far more risk from ESD from yourself or the work surface than the iron!
Despite being durable and powerful, and having an easy temperature control feature, the iron is also light and really compact, so I can easily have all my soldering stuff in one small toolbox. It is also comfortable in the hand. I don't know why some reviewers have said it's hard to hold, I didn't find this at all. I love using it. I highly recommend this iron if you want to treat yourself to all the best features and reduce your desk clutter. Just make sure you buy GENUINE Hakko tips. This iron will of course take any of the millions of clone T18 tips out there, but the Hakko tips have so many advantages. Why buy a performance vehicle only to put crappy tires on it? The tip is where the rubber meets the road, so to speak, so do yourself a favour and ditch your cheap soldering iron tips!


I needed an iron that got hotter and could maintain heat so that I could solder sections of copper plate and thick wire for a project. This iron worked great! It heats up incredibly quickly and gets very hot. No problem heating up large sections of material. The indicator shows when it is up to you're desired temp which is very handy.
The build quality is fantastic. The plastic used seems to be a thick nylon and is very sturdy. The cord is very nice, it's not too heavy and easily flexes so it is far less likely to pull the iron around with it's weight. Even the insulation on the cord has a nice feel to it. The temp dial has a firm click and smooth motion. Overall the tool is simply pleasant to use.
I have no complaints. The price is worth it and this will likely be the last iron I buy for a long time.



I will note ONE IMPORTANT THING: many reviews on here complain of the ceramic heating component fracturing after the first few uses. I believe this is because the tip retaining nut is on WAY TOO TIGHT from factory for some of these, which causes it to get compressed too much when heat is applied and everything around it expands ever so slightly, which would cause the cracking and fracturing. The FIRST thing I would do after unpacking it is undo that nut (you might need a wrench. That's how tight mine was on there, and trust me my grip has accidentally broken hardware in the past, so it was not out of lack of trying). After doing so, HAND TIGHTEN THE NUT AND DON'T USE TOOLS TO DO SO. That should save you some heart ache, as this soldering iron is excellent 👌.