この商品を買った人はこんな商品も買っています
ページ 1 以下のうち 1 最初から観るページ 1 以下のうち 1
メーカーによる説明
主要諸元
家庭用電源AC100V(50/60Hz)専用､消費電力48W(24W×2台)
長さ50cmの連結式排気ホース4本付き
折りたたみ式エプロン･フード､取手付き
サイズ:40×30×33cm(収納時)､40×30×53cm(展開時)
別売り交換用フィルター(※1)もあります｡
※1 ペインティングブースII 交換フィルター
吹き付け塗装のベストパートナー
室内での吹き付け塗装を強力にサポートする塗装ブース｡スプレーワーク ペインティングブースII(ツインファン)は､前面パネルの特殊構造がポイント｡パネル外周部にスリット状の吸気口を配置して､中心部から外れた塗料ミストも吹き返すことなく吸引｡中心部の塗料ミストはフィルターを3回通過してから吸気口に吸い込まれるため､フィルターの目詰まりによる急激な吸引力低下を起こしにくい構造｡しかも､音の静かなシロッコファンを2基装備｡余裕の排気風量を実現｡迷彩などの繊細な吹き付け塗装時はもちろん､1/35MMや1/24カーモデルの缶スプレー塗装にも十分対応｡
模型キット､塗料､エアーブラシなどの工具類はセットに含まれていない｡
イメージ付きのレビュー
Hood
I have owned two manufactured spray booths prior to this one. But this is the first name brand one. I bought this one because it has two fans. My current situation has me in a very compact space and I wanted the extra suction. You can definitely feel it, which is good. The twin suction presented a challenge for exhaust, but Amazon provided a solution. Note that the included pipes are small, and fit into the pipe that would normally accommodate a 100cm air conditioning tube. The price was only a bit more expensive than the single fan unit, which was comparably priced to the generic booths. Like all such booths, the space is a bit tight for shooting. I paint miniatures, so this isn't a big deal. That said, the hood of this thing is very shallow at the sides. More so than generic units. Additionally, it's a very cheap, soft plastic, similar to a file folder. Not very inspiring, bit I can put very simple tools on it, including my airbrush cleaning brushes and mixing pots. The frame of the unit itself has a lip that can hold paint pots. I plan to go to the ¥100 store and attach a shelf or something. Note that I already have a ¥100 tray at the bottom of it. I highly recommend this to others. I also plan to get some kind of extra filter at the front of the unit. I want extra protection of the foam and exhaust fans. Note that the fans each have their own switches. At first I was annoyed by this, but I just have them looped over the carrying handle, so they are accessible. Some might only want the flexibility to run just one fan, but I run both. Finally, note that fully open, it's about 53cm front to back. This is quite a bit bigger than generic booths I've used, but this worked out for me. Overall, I am pleased with it. It takes a big hit because of the flimsy hood. Generic ones tend to have sturdy ones that fold out and in easily, so I was quite shocked that this one doesn't have that functionality. Because it has two fans, it is louder than generic versions I've used, but with one fan running, it does seem quieter. Regardless, it's quieter than my quiet air compressor, and no louder than a standard room fan. I want to try giving it some rubber feet, and I suspect that will help a bit. Recommendeded.
上位レビュー、対象国： 日本
レビューのフィルタリング中に問題が発生しました。後でもう一度試してください。
2020年8月7日に日本でレビュー済み
Amazonで購入
I have owned two manufactured spray booths prior to this one. But this is the first name brand one. I bought this one because it has two fans. My current situation has me in a very compact space and I wanted the extra suction. You can definitely feel it, which is good. The twin suction presented a challenge for exhaust, but Amazon provided a solution. Note that the included pipes are small, and fit into the pipe that would normally accommodate a 100cm air conditioning tube. The price was only a bit more expensive than the single fan unit, which was comparably priced to the generic booths. Like all such booths, the space is a bit tight for shooting. I paint miniatures, so this isn't a big deal. That said, the hood of this thing is very shallow at the sides. More so than generic units. Additionally, it's a very cheap, soft plastic, similar to a file folder. Not very inspiring, bit I can put very simple tools on it, including my airbrush cleaning brushes and mixing pots. The frame of the unit itself has a lip that can hold paint pots. I plan to go to the ¥100 store and attach a shelf or something. Note that I already have a ¥100 tray at the bottom of it. I highly recommend this to others. I also plan to get some kind of extra filter at the front of the unit. I want extra protection of the foam and exhaust fans. Note that the fans each have their own switches. At first I was annoyed by this, but I just have them looped over the carrying handle, so they are accessible. Some might only want the flexibility to run just one fan, but I run both. Finally, note that fully open, it's about 53cm front to back. This is quite a bit bigger than generic booths I've used, but this worked out for me. Overall, I am pleased with it. It takes a big hit because of the flimsy hood. Generic ones tend to have sturdy ones that fold out and in easily, so I was quite shocked that this one doesn't have that functionality. Because it has two fans, it is louder than generic versions I've used, but with one fan running, it does seem quieter. Regardless, it's quieter than my quiet air compressor, and no louder than a standard room fan. I want to try giving it some rubber feet, and I suspect that will help a bit. Recommendeded.
このレビューの画像
